Radio Support
Support for setting up your Radio
Note: One thing to check to make sure you don't have a cable plugged into the K3s Line In jack. If you do, that will shut off the signal from the US...
Mon, Aug 24, 2020 at 6:45 AM
We found out when using the Kenwood TS-2000 and activating the Bandscope Scan in Ham Radio Deluxe, the program can crash. A easy sollution for this is to: ...
Fri, Jul 31, 2020 at 2:45 AM
"The TX-500 transceiver only supports the Kenwood TS-2000 protocol command set: ID; AI; RX; TX; IF; FA; FB; MD (6-DIG); FR; FT; FN; PA; RA The ...
Thu, Oct 27, 2022 at 4:41 AM
As of this writing (28-Mar 2023) we are in a release cycle that focuses on Logbook. That release will be the v6.9 release. In the interim, operators who...
Thu, Feb 29, 2024 at 10:38 AM
TS-590 - 590S - 590SG USB Configuration The Kenwood TS-590 series of radios can be connected to the computer using ONLY a single USB cable. A driver is ...
Mon, Aug 31, 2020 at 6:21 PM
This will be pretty simple and easy. Choose the Icom IC-7000 in Rig control. Do not check CTS/DTR/RTS Set Port to Auto Detect Set Port to Auto Detect ...
Wed, Oct 19, 2022 at 8:02 AM
Ham Radio Deluxe V6.3.0.410 or later builds. Yaesu FT-817, FT-847, FT-857, FT897 CAT support Yaesu USA have advised us to remove some of the c...
Sat, Feb 13, 2021 at 8:39 AM