If you are finding that the location and beam heading for W8S is incorrect in the ALE and Lookup Pane, please do the following:


Update the HRD Country List by clicking on Tools > Global HRD Settings:



Then click on Auto-Update, Check for Update, Use Updated List, and click on OK. (You may also want to make sure you have some selection other than "No Automatic Update" selected. At least weekly suggested.)



Then...
Run the Command Prompt using the steps shown here:



Then, in the Command Prompt window, type the following (with quotes):
del "%appdata%\HRDLLC\HRD Logbook\W8S.qrz"


...then hit the Enter key to execute the command. Type "exit" (without quotes) to close the Command Prompt window.

Then do a lookup in the ALE for W8S and let me know if the problem is corrected.